Vehicle Barrier Gate Functions& Features:
1: Arm will automatically open when power off, no clutch design
When power on, barrier will automatically reset, restore to close state. If you have special need that manual intervention, it can
be set up easily, you can gently rotate poles to manual Open / close boom without open the housing by using
adjust the control board
2: a variety of input and output modes can be selected, often open and close can be selected.
3: rod angle can be adjusted from 55~90 degrees, 10 degree resolution.
4: Speed can be adjusted, 0.9s to 6s
5:all kinds of state signal output.
6: barrier gate running state OK signal output.
7: alarm signal output.
8: traffic lights signal relay output.
9: external Vehicle detection signal, infrared sensor signal.
10: AC90V~AC264V50/60Hz, the global universal voltage standard. Also available
24V battery power supply.(No mains place to pick up solar energy,wind energy to recharge battery)
11: the running noise is less than 60dB.
12: Power consumption: 50W, maximum power 100W.
13:It is also a simple matter to change the handing on-site from right-Hand to left-Hand.
14: automatically detect whether the balance spring fatigue or damage, if the spring
fatigue tips to adjust, if you can not adjust the spring, replace the spring is very easy,
no need to use tools, hand can be replaced.
15: remote control open / close and car park system control open / close, separate
input, respectively, the number of corresponding statistics.
16: Inbuilt RS485 connected to PC of the parking system.
Reviews
There are no reviews yet.